UTEBIT Camera Bar Review: Mount Action Cameras Side by Side (Plus a 2-Device Plate for Camera and Mic)

This is the English edition of a video from my Japanese YouTube channel, iestaLife. I test gadgets and camera gear at home in Japan, so product links go to Amazon Japan.

Quick take

I bought two cheap camera bars: a long UTEBIT bar that holds up to four devices, and a short two-device plate. The four-device bar is a simple way to mount action cameras side by side so they move with exactly the same shake, which makes stabilization and image-quality comparisons fair. The two-device plate let me put my camera and microphone on a single tripod. Both cost roughly 1,000 yen each at the time of recording.

UTEBIT four-device camera bar and a two-device camera plate — The short two-device plate (top) and the UTEBIT four-device bar (bottom)

What I tested

UTEBIT camera shoe bracket, about 30 cm, up to four devices
A short two-device camera plate (brand not visible)
On the long bar: DJI Osmo Action 4, a 360-degree camera and an iPhone Pro Max
On the short plate: a ball head with my main camera, plus a shotgun mic, on one tripod

What I found

Four-device bar for comparisons. With all cameras on one bar, they move together on the same bar as you walk, so differences in stabilization and image quality are easy to see. Hold the bar near the middle; holding one end makes each camera move differently.

Action camera, 360 camera and iPhone mounted side by side on a four-device bar — Osmo Action 4, a 360 camera and an iPhone side by side

Two catches. Holding the bar with both hands is steadier than normal one-handed walking, so footage may look a bit better than real-world use. And although it is rated for four devices, a wide phone like the iPhone Pro Max takes up space; with one on the bar, three devices was about the limit.

Two-device plate for a tidier tripod. In my recording room, the camera sat off-center and the mic was clamped to the sofa in an awkward spot. I put the short plate on the tripod with the camera and ball head on one end and the mic on the other. The plate felt sturdy with my setup. The background framing did not change as much as I hoped, but having the camera and mic on one tripod was handy.

Camera and microphone mounted side by side on one tripod using a two-device plate — Camera and mic sharing one tripod

Comparison

	Four-device bar	Two-device plate
Capacity	Up to 4	2
My use	Side-by-side action camera tests	Camera + mic on one tripod
Watch out for	Wide phones reduce it to about 3 devices	Framing may need some adjusting

Who it’s for

Anyone comparing action cameras or phones under the same conditions
Anyone with one tripod who wants a camera plus a mic on it
Not ideal if you want test footage that exactly matches casual one-handed walking

Watch the video

The video is in Japanese, but the setup is easy to follow. Useful moments: around 1:20 for the cameras on the long bar, and 3:50 for the camera-and-mic tripod setup.

Limitations

This is a short first-use video, not a long-term test. I did not measure load capacity; I only used my own camera setup. The short plate had no visible brand, so I cannot point to the exact listing.

Products

UTEBIT camera shoe bracket, 30 cm, four devices: on Amazon Japan

The Amazon Japan link above is an affiliate link. As an Amazon Associate, I earn from qualifying purchases. Check the listing for the exact model, current price and shipping availability in your region.

More reviews in English